Blog
SKF imported bearing grease is better or oil choice

SKF imported bearing grease is better or oil choice

2024-03-19

When choosing a grease, it is necessary to choose a grease that is suitable for the conditions of use (temperature, speed, load and environment, etc.), which are related to the basic characteristics of the grease, and the basic characteristics of the grease depend on the type of thickener and base oil.

What are the reasons for SKF bearing vibration sound

What are the reasons for SKF bearing vibration sound

2024-03-19

In many applications, the stiffness of SKF bearings is the same as that of surrounding structures. Due to this feature, as long as SKF bearings (including preload and clearance) are correctly selected and configured in the application, it is possible to reduce vibration in the application.

Three standards for the quality of SKF imported bearings

Three standards for the quality of SKF imported bearings

2024-03-19

According to the technical requirements of SKF imported bearings installation, use, maintenance and maintenance, the load, speed, working temperature, vibration, noise and lubrication conditions of the bearings in operation are monitored and checked, and the cause is immediately found and adjusted to restore it to normal.

How to perform a running check on SKF bearings

How to perform a running check on SKF bearings

2024-03-19

After the installation of SKF bearings, in order to check whether the installation is correct, a running check should be carried out. Small machines can be rotated by hand to check whether they are rotating smoothly. Check items include poor operation caused by foreign bodies, scars and indentation, unstable torque caused by poor installation and poor processing of mounting seat, excessive torque caused by too small clearance, installation error, sealing friction, and so on. Power operation can begin if there is no anomaly.

How to choose SKF imported bearing support structure

How to choose SKF imported bearing support structure

2024-03-19

The axial position of the shaft is adjusted to meet the special requirements of some meshing drives. For example, in worm transmission, the axis of the worm must fall in the middle plane of the worm gear to ensure its correct engagement, so the spiral wheel shaft is required to adjust its position in the axial direction. In the bevel gear drive, the joint conical conical vertex of the two bevel gears must coincide, so the two bevel gear shafts are required to be adjusted axially.

Main factors affecting SKF bearing grinding deterioration layer

Main factors affecting SKF bearing grinding deterioration layer

2024-03-19

There are two main factors affecting the grinding metamorphic layer of SKF bearing, which are the grinding force and grinding heat of SKF bearing.

< 12 >