Imperial Single Row-1

Inch single-row tapered roller bearings are mainly suitable for bearing combined radial and axial loads mainly based on radial loads, while large taper angle tapered roller bearings (27°~30°) can withstand radial and axial loads mainly based on bearing loads. Axial and axial combined load, but generally not suitable for pure axial load. The structure is separable, the inner ring and the outer ring can be installed separately, and the outer ring can be interchanged, which is convenient for installation and removal.

Deep Groove Ball Bearings 6000 Series

Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.

Tapered Roller Bearings Double Row

Double row tapered roller bearing, the bearing has one outer ring and two inner rings, and there is a spacer between the two inner rings. The clearance can be adjusted by changing the thickness of the spacer. It can bear radial load and bidirectional axial load at the same time. Double row tapered roller bearings are typically used in gearboxes, hoisting equipment, rolling mills and machines in the mining industry, e.g. tunnelling machines.

Angular Contact Ball Bearings 5300E Series

Large Angular Contact Ball Bearing - Open, Double Row Two types of contact angles can be selected according to the magnitude of the axial load and moment load. Similar to single-row deep groove ball bearings, with a seal (2NS) and shield (ZZ) attached. Can be used on Blower, High-speed vacuum pump receiver, Supercharger and Two-wheeled vehicle transmission

Cylindrical Roller Bearings NU10xx EM Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller.EM Series, which combines the strengths and technologies of previous cage designs into a one-piece brass roller-guided cage which achieves lower temperature running and quieter operation.High strength and wear resistant cage and High load rating.

Pillow Block Bearings UCP NAP Type

UCP series housed units feature the set screw locking (UC) bearing insert. Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Housing designed for ease of bearing replacement.

Self-aligning Ball Bearings 1300 Series

1300 Series Self-aligning ball bearings feature: Excellent high-speed performance Accommodate static and dynamic misalignment Low friction Excellent light load performance

Thrust Spherical Roller Type 29000

Cylindrical roller thrust bearings can be split into thrust cylindrical roller and cage assemblies, shaft washers and races. Such bearings can withstand large axial loads in one direction, but cannot withstand radial loads, and they do not have self-aligning capabilities. Mainly used in heavy machine tools, high-power marine gearboxes, oil drilling rigs, vertical motors and other machinery.

Thrust Ball Bearings 54000U Series

Double direction thrust ball bearings consist of one shaft washer, two housing washers and two ball and cage thrust assemblies. The bearings are separable so that mounting is simple. The various parts can be mounted separately. The housing washers and ball and cage thrust assemblies are identical to those of the single direction bearings. Double direction thrust ball bearings can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. They must not be subjected to radial load.

Deep Groove Ball Bearings Double Row

Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. The design of double row deep groove ball bearings is basically the same as that of single row deep groove ball bearings. The deep groove ball shaft-shaped raceway plus the excellent tightness between the raceway and the steel ball.For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62xx and 63xx series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).

Cylindrical Roller Bearings NF Series

Single row cylindrical roller bearings NF type has a single rib on the outer ring, and two ribs on the inner ring.Can receive single direction axial loads. Much like the NJ bearing, these bearings possess some thrust load capability.

Linear Motion Bearings LME.UU

LME.UU This type is metric dimension series generally used in Europe. LM/LME linear bushing has a steel outer ring with grooves for a circlip and a polyamide ball retainer with 3 to 6 ball circuits depending on size. On request linear ball bushing are also available in stainless steel. All linear bearings with the designation UU have seals from both sides.